-Material: Rep-Flex TPU - Vacuumed Sealed with desiccant -Shore Hardness: 95A -Weight: 800g per spool -Diameter: 1.75mm (+/- 0.05mm)
-While using TPU filament, a direct drive extruder is recommended in that it can produce parts of higher quality and avoid jamming. A Bowden extruder can also achieve decent print quality, but it requires proper setting and calibration. -Recommended extruder temperature:195 - 230°C -Recommended platform temperature: 40 - 60°C -Nozzle diameter: 0.4-0.8mm -Printing Speed: 15-30mm/s -Please remember to clean the extruder nozzle before loading this filament to avoid jamming. -If you have problems while printing, please try to slow down the printing speed and adjust the temperature. If both attempts fail, please feel free to contact our support.